A pusher is a box — a moldboard with side panels — and those side panels are the whole point.
A plow blade spills snow off both ends as you push. A pusher contains it, which means you carry a full load from one end of the lot to the pile without leaving windrows behind you. On open areas, that's substantially more snow moved per pass.
The tradeoff: no angling, no casting. A pusher goes straight and carries. It's a volume tool, not a finesse tool.
What You'll Use It For
- Parking lots and open paved areas
- Wide sidewalks and plazas
- Loading dock aprons
- School and campus lots
- Apartment and condo parking
- Stacking snow at pile locations
- Clearing large flat areas fast
Pusher vs. Plow
| Snow Pusher | Plow / V-Plow | |
|---|---|---|
| Volume per pass | Highest | Lower — spills off the ends |
| Angling / casting | No | Yes |
| Tight spaces | Poor | Good |
| Drift breaking | Poor | V-plow excels |
| Best for | Open lots and plazas | Walks, tight sites, varied conditions |
Most snow operations that own both use a pusher on the open areas and a plow on walks and tight access. If you're buying one attachment for mixed work, a V-plow is more versatile. If your work is lots, the pusher moves more snow.
How to Spec It
Width. Wider moves more but needs traction to push it. On a mini skid steer, over-widening means spinning tracks rather than moving snow.
Side panel height. Taller panels carry more snow before it spills over.
Cutting edge.
- Steel — durable, scrapes clean, damages decorative surfaces
- Rubber — common on pushers, gentler, conforms to uneven pavement, quieter
- Poly — middle ground
Rubber edges are popular on pushers specifically because you're working large paved areas where surface condition varies.
Shoes or wear bars. Set scrape height and protect the edge.
Weight. Pushers are relatively heavy for their function. Check against machine capacity.
Which Models Run It
No hydraulics required — a pusher is a passive attachment. Traction is the limiting factor.
YJ1200 — wide track gives the best traction for pushing volume. The right choice if lots are your work.
YJ1000 — solid general-purpose combination.
YJ2000 / YJ3000 — larger pushers and heavier accumulation.
On any machine, size the pusher to what the tracks can actually push in wet snow, not to what fits.
Trades That Use It Most
Snow Removal · Property Management & HOAs · Schools & Universities · Municipal & Public Works · Warehouse & Industrial · Marinas & Boatyards
Snow Pusher FAQ
Pusher or plow?
Pusher for open lots and volume. Plow for walks, tight sites, and anywhere you need to cast or break drifts. Operations with both use them for different parts of the same property.
How wide should I go?
Sized to traction, not to the machine's mounting plate. An oversized pusher on a light machine just spins.
Will it work on gravel?
Poorly — the box collects gravel along with snow. Plows with shoes set high work better on unpaved surfaces.
Rubber or steel edge?
Rubber conforms to uneven pavement and protects surfaces; steel scrapes cleaner and lasts longer. Rubber is the more common choice on pushers.
Can it stack snow?
It'll push a pile up to a point. For building tall stacks, a bucket or a plow in scoop position gives more control.
Will one from another brand fit?
If it uses the universal mini skid mount, yes.
Any maintenance?
Check the edge for wear, inspect side panel welds, and rinse salt off. Minimal — there's little to go wrong.
Get a Quote
Tell us your lot sizes and surfaces, and we'll spec the pusher width to your machine's traction.
Request pricing · Call (330) 825-2307